Network analyzer > Introduction
DESCRIPTION: From 10 Hz to 1.05 THz, choose from a growing selection of RF and Microwave network analyzers to measure S-parameters, insertion loss, gain, return loss, balanced parameters, differential measurements, compression, distortion, and noise figure. Compare Agilent network analyzers: Select and Compare table Choose the right network analyzer for your application: Agilent Network Analyzer Selection Guide MORE INFORMATION: PNA Family of Microwave Network Analyzers, 300 kHz to 1.05 THz PNA-L is a general-purpose network analyzer, PNA is suitable for passive and active device test, and PNA-X is Agilent’s highest performance analyzer. Measurements include s-parameters, gain, conversion loss, compression, and noise figure. ENA Series RF Network Analyzers, 9 kHz to 20 GHz The standard ENA expands network analysis with advanced features for multiport and balanced measurements, while the lower cost ENA-L analyzers provide basic S-parameters with an integrated 50 or 75-ohm test set. FieldFox RF Analyzers, 4/6 GHz FieldFox analyzers are portable, handheld RF test tools - a handheld vector network analyzer, cable and antenna tester, handheld spectrum analyzer, power meter, and vector voltmeter. E5100A Network Analyzer,10 kHz to 300 MHz The E5100A is designed for component testing, especially resonators and filters, which require high throughput. The E5100A improves productivity with its fast measurement speed, fast waveform analysis commands, and high-speed processor. 4395A Combination Network/Spectrum/Impedance Analyzer,10 Hz to 500 MHz The 4395A provides vector network analysis, spectrum analysis, and optional impedance measurements for lab and production applications. Measurements include gain, phase, group delay, distortion, spurious, CN, and noise measurements. 8757 Scalar Network Analyzer System, 10 kHz to 110 GHz The 8757D allows you to measure insertion loss, gain, return loss, SWR, and power quickly and accurately. High-performance Agilent detectors, bridges, and sources, complete this scalar measurement system. Network Analyzer Accessories Calibration kits, verification kits, test sets, probes and cables.
read moreNetwork Analyzers > PNA Family of Microwave Network Analyzers, 300 kHz to 1.05 THz
DESCRIPTION: The PNA family of high performance of network analyzers covers the frequency range of 300 kHz to 1.05 THz. The architecture includes high quality, stable hardware, and flexible software. The PNA-L is a general-purpose instrument, the standard PNA is suitable for testing passive and active devices, and the PNA-X is Agilent’s highest performance network analyzer. PNA-X is designed to provide excellent passive measurements, and a variety of active measurements such as nonlinear, gain compression, intermodulation distortion, and...
read morePNA Family of Microwave Network Analyzers > N5241A PNA-X Microwave Network Analyzer
KEY SPECIFICATIONS: • 10 MHz to 13.5 GHz • 2- or 4-ports with two built-in sources • 132 dB system and 130 dB receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth • High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB) • Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver • Low noise floor of -114 dBm at 10 Hz IF bandwidth Data Sheet 2010-06-08 | PDF 4.44 MB DESCRIPTION: World´s widest range of single-connection measurement applications The PNA-X...
read morePNA Family of Microwave Network Analyzers > N5242A PNA-X Microwave Network Analyzer
KEY SPECIFICATIONS: • 10 MHz to 26.5 GHz • 2- or 4-ports with two built-in sources • 132 dB system and 130 dB receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth • High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB) • Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver • Low noise floor of -114 dBm at 10 Hz IF bandwidth Data Sheet 2010-06-08 | PDF 4.44 MB DESCRIPTION: World´s widest range of single-connection measurement applications The PNA-X...
read morePNA Family of Microwave Network Analyzers > N5244A PNA-X Microwave Network Analyzer
KEY SPECIFICATIONS: • 10 MHz to 43.5 GHz • 2- or 4-ports with two built-in sources • 126 dB system and 129 dB receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth • High output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB) • Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver • Low noise floor of -111 dBm at 10 Hz IF bandwidth Data Sheet 2009-05-27 | PDF 1.43 MB DESCRIPTION: World´s widest range of single-connection measurement applications The PNA-X...
read morePNA Family of Microwave Network Analyzers > N5245A PNA-X Microwave Network Analyze
KEY SPECIFICATIONS: • 10 MHz to 50 GHz • 2- or 4-ports with two built-in sources • 126 dB system and 129 dB receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth • High output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB) • Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver • Low noise floor of -111 dBm at 10 Hz IF bandwidth Data Sheet 2009-05-27 | PDF 1.43 MB DESCRIPTION: World´s widest range of single-connection measurement applications The PNA-X...
read morePNA Family of Microwave Network Analyzers > N5247A PNA-X Microwave Network Analyzer
KEY SPECIFICATIONS: • 10 MHz to 67 GHz • 2- or 4-ports with two built-in sources • Enables 4-port 110 GHz single-sweep solution • 110 dB system and 129 dB receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth • High output power (+10 dBm at 67 GHz) and a wide power sweep range (40 dB) • 0.1 dB receiver compression of +11 dBm at 67 GHz Data Sheet 2010-12-06 | PDF 2.57 MB DESCRIPTION: World´s widest range of single-connection measurement applications The PNA-X network analyzer is the world´s most integrated and...
read morePNA Family of Microwave Network Analyzers > N5264A PNA-X Measurement Receiver for Antenna Test
KEY SPECIFICATIONS: N5264A PNA-X Measurement Receiver for antenna and system level applications • 400,000 points per second data acquisition simultaneously on five receiver channels • Five IF inputs available for simultaneous measurements • Fast-CW mode enables 500 million point data buffer (Option 118) • Built-in 26.5 GHz LO source with +10 dBm output power (Option 108) • 20 dB better receiver dynamic range than existing antenna receivers (135 dB at 10 Hz IFBW), with up to 5 channels/unit • 8510/8530A built-in code emulation for...
read morePNA Family of Microwave Network Analyzers > E8361C PNA Microwave Network Analyzer
KEY SPECIFICATIONS: • 10 MHz to 67 GHz • 94 dB of dynamic range and <0.006 dB trace noise (specified to 67 GHz, with operation to 70 GHz) • <26 usec/point measurement speed, 32 channels, 20,001 points • TRL/LRM calibration, on-wafer, in-fixture, waveguide, and antenna.measurements • Mixer conversion loss, return loss, isolation, and absolute group delay • Amplifier gain compression, harmonic, IMD, and pulsed-RF Data Sheet 2010-01-08 | PDF 600 KB DESCRIPTION: General-purpose network analysis with optional software and/or...
read morePNA Family of Microwave Network Analyzers > E8362C PNA Microwave Network Analyzer
KEY SPECIFICATIONS: • 10 MHz to 20 GHz • 123 dB of dynamic range and <0.006 dB trace noise • <26 usec/point measurement speed, 32 channels, 20,001 points • TRL/LRM calibration, on-wafer, in-fixture, waveguide, and antenna measurements • Mixer conversion loss, return loss, isolation, and absolute group delay • Amplifier gain compression, harmonic, IMD, and pulsed-RF Data Sheet 2008-10-03 | PDF 739KB DESCRIPTION: General-purpose network analysis with optional software and/or hardware to customize for your application –...
read more
English
Română 
